THIS IS HOW TO USE THIS PRODUCT
This is the instructions on how to use the Aluminum Foil Butyl Waterproof Sealant Tape for Perfect Result.
Step 1: Clean the surface to be applied very well, free from any Oil, Dust, Liquid, Rust, Dirt, Moisture, Grease, etc Using Brush or Sandpaper. ( making sure that the Surface is very Clean and Dry)
Step 2: Measure the surface to be applied and cut the Aluminum Foil Butyl Waterproof Sealant Tape accordingly.
Step 3: Remove the Protective film at the back of the Tape and Stick the Aluminum Foil Butyl Waterproof Sealant Tape on top of the surface.
Step 4: Press the surface of the Aluminum Foil Butyl Waterproof Sealant Tape very hard to ensure no Entrance/Penetration of air in between.
Step 5: Allow the Aluminum Foil Butyl Waterproof Sealant Tape to React and Seal the Surface Permanently. ( The Sealant Occurs Between 1hour to 48 hours depending on the structure of the surface)
NOTE: you must press it very hard after sticking it for proper sealant.
NOTE: It is very very Important to Press Down the Edges and Ends of the Tape to Prevent Air and Dirt Penetration in other to ensure a good tight seal.
All Joint Connections have to be Overlapped with Minimum of 5cm lapping.
Once it is Sealed,it is Permanently Sealed.