Weather Resistant Indoor & Outdoor Use: Our tape firmly sticks to rough & uneven surfaces of all kinds including wood, plastic, glass, vinyl, brick, stucco metal and rubber for a seal that locks & lasts. The ideal greenhouse tape.
ALL QUESTIONS??? ANSWERED
YES IT WORKS ON ALL TYPES OF ROOF
YES IT WORKS ON ZINC
YES IT WORKS ON IRON
YES IT WORKS ON TANKS[DEPENDS ON WHERE THE CRACK IS ;YES , IT IS THE TRUTH , stitch tank first before using tape inside and outside NO ONE WILL TELL YOU.}
YES IT WORKS ON THAMPOLINE
YESI WORKS ON WOOD.
YES IT WORKS ON DRUMS AND BUCKET
YES IT WORKS ON PIPE
YES IT WORKS ON DECKING
YES IT CAN LASTS FOR 15YEARS
THIS Is HOW TO USE THE ALUMINUM FOIL BUTYL WATERPROOF SEALANT TAPE FOR A PERMANENT SEAL
Step 1: Clean the surface to be applied very well, free from any Oil, Dust, Liquid, Rust, Dirt, Moisture, Grease, etc Using Brush or Sandpaper. ( making sure that the Surface is very Clean and Dry)
Step 2: Measure the surface to be applied and cut the Aluminum Foil Butyl Waterproof Sealant Tape accordingly.
Step 3: Remove the Protective film at the back of the Tape and Stick the Aluminum Foil Butyl Waterproof Sealant Tape on top of the surface.
Step 4: Press the surface of the Aluminum Foil Butyl Waterproof Sealant Tape very hard to ensure no Entrance/Penetration of air in between.
Step 5: Allow the Aluminum Foil Butyl Waterproof Sealant Tape to React and Seal the Surface Permanently. ( The Sealant Occurs Between 1hour to 48 hours depending on the structure of the surface)
Once it is Sealed, it is Permanently Sealed. For clarity sir, this is the application instructions: The surface to be applied must be very
clean, free from any dirt, oil, grease or dust before sticking the Tape, after sticking the Tape you must press it hard to make sure that there is no entrance of air in between, then allow it for 24 hours to 48 hours to react and then it is sealed permanent