YES IT WORKS ON TANKS(YOU WILL HAVE TO STITCH THE TANK FIRST BEFORE APPLYING THE TAPE INSIDE AND OUTSIDE.}
YES IT WORKS ON THAMPOLINE
YESI WORKS ON WOOD.
YES IT WORKS ON DRUMS AND BUCKET
YES IT WORKS ON PIPE
YES IT WORKS ON DECKING
YES IT CAN LASTS FOR 15YEARS
THIS IS THE INSTRUCTIONS ON HOW TO USE THE ALUMINUM FOIL BUTYL WATERPROOF SEALANT TAPE FOR PERFECT RESULT.
Step 1: Clean the surface to be applied very well, free from any Oil, Dust, Liquid, Rust, Dirt, Moisture, Grease, etc Using Brush or Sandpaper. ( making sure that the Surface is very Clean and Dry)
Step 2: Measure the surface to be applied and cut the Aluminum Foil Butyl Waterproof Sealant Tape accordingly.
Step 3: Remove the Protective film at the back of the Tape and Stick the Aluminum Foil Butyl Waterproof Sealant Tape on top of the surface.
Step 4: Press the surface of the Aluminum Foil Butyl Waterproof Sealant Tape very hard to ensure no Entrance/Penetration of air in between.
Step 5: Allow the Aluminum Foil Butyl Waterproof Sealant Tape to React and Seal the Surface Permanently. ( The Sealant Occurs Between 1hour to 48 hours depending on the structure of the surface)
Once it is Sealed, it is Permanently Sealed. For clarity sir, this is the application instructions: The surface to be applied must be very
clean, free from any dirt, oil, grease or dust before sticking the Tape, after sticking the Tape you must press it hard to make sure that there is no entrance of air in between, then allow it for 24 hours to 48 hours to react and then it is sealed permanently